Part Mode provides Users the ability to view a Coverage Map, Paint Defects and the Part Coating as it appears to the naked eye.  Select a Part Mode to view by toggling the Part Mode button.

Coating

Coating Part Mode displays the Part as it would appear to the naked eye.  A Part that has no Coats will appear bare.  A Part with one or more painted Coats will appear in the selected Paint Color.  Toggle the Part Mode button to view the Coating.

Coverage Map

The Coverage Map uses colors to display paint Coat thickness as it relates to the Project Coat Settings.  Green represents areas on the Part where Coat thickness is within target Mil Build range.  Blue represents areas on the Part where Coat Mil Build is lower than the target Mil Build range (too thin) and Red represents areas on the Part where Coat Mil Build is higher than the target Mil Build range (too thick).  Toggle the Part Mode button to view the Coverage Map.

Defects

The most common paint defects are tracked and visible on the painted Part.

Defects Part Mode displays the paint Coat Defects on the Part.  Users can view Dry Spray, Orange Peel, and Drips defects.  Toggle the Part Mode button to view Defects then toggle the Defects button to select the Defect to view.

Dry Spray

The Dry Spray defect occurs when the spray gun is too far from the Part or is too off angle.  To view the Dry Spray defect on the Part toggle the Defects button to Dry Spray.  If no Dry Spray was created then no areas of the Part are highlighted.

Orange Peel

The Orange Peel defect occurs when the spray gun is too far from the Part. To view the Orange Peel defect on the Part toggle the Defects button to Orange Peel.  If no Orange Peel was created then no areas of the Part are highlighted.

Drips

To view the Drips defect on the Part toggle the Defects button to Drips.  If no Drips were created then no areas of the Part are highlighted.